You have no items in your shopping cart.
Why we use Polycarbonate Sheets?
3mm or 4mm Clear Polycarbonate is the best material for secondary glazing. It has excellent sound absorption qualities as well as being light weight, glass clear, high impact, fire rated, and cost effective. It is also a superb material for greenhouse glazing as it is 200 times stronger than glass and very lightweight.
Why do you Not use Acrylic?
Acrylic sheet has many of the same properties as polycarbonate sheeting. However, it is missing one key component - A Fire Rating ! Because most of our customers use this product on homes or office building interiors, it is important to us to only provide the safest possible product. Fire Rating: BS 476: Part 7, Classification: IY
What thickness do I need?
The key to choosing the correct thickness is in having a material which is rigid enough without being too heavy to handle. The larger the panel the thicker the material required. As a rough guide we would recommend the following:
|Up to 1.5 sq. metre||3mm|
|1.5 - 2 sq. metre||4mm|
How should I fix my secondary glazing?
A great deal depends on the type of window frames you have. Probably the easiest and most cost effective manner is with magnetic self adhesive tape. Magnetic tape is available in our store.
When you purchase the Magnetic Tape kit it comes with 2 rolls included. One roll is a Magnetic strip and the other roll is a Steel strip or another Magnetic strip. Both rolls have a self adhesive strip on one side. Usually, the magnetic strip is applied to the plastic panel (or to the Profiles, if used), while the steel strip is applied to the window frames. Thus, when you put the plastic panel on over the window frame the magnetic strip on the panel will connect to the steel strip on the frame - creating a magnetic seal around the window.
You can choose from either a White Magnetic Tape kit (for white window frames) or Brown Magnetic Tape Kit (brown window frames). The Magnetic Tape is intended to be used with Profiles. See example pictures of the Magnetic Tape Rolls below.
Brown Magnetic Tape
White Magnetic Tape
White Steel Tape (Not Magnetic)
Care of your Secondary Glazing.
Plastic sheet is easy to care for. The only thing which you must remember is NOT to use any abrasive materials when cleaning. To clean your sheet use a warm soapy water and a clean soft cloth (a microfibre cloth is ideal) If your sheet becomes scuffed, small scratches may be polished out using a small amount of car polish and a soft cloth.
Profiles are used to give the Ecoglaze panels a nice finished look. They also help to protect the edges of the plastic from being chiped or damaged. The plastic panels slide into the profiles without the use of any tools.
The profiles come with straight angles. We suggest making 45% cuts - using a Stanely blade or small saw. This way you can create the profiled corners as you see in the picture below.
To buy a sheet and have us cut it to your specifications, simply follow these steps:
- Click on the thickness of sheet you need.
- Select a sheet size that is larger than the size you need. and enter the number of sheets you require (in the stocked size).
- Click the Cut-to-Size check box
- In the space provided, enter the dimensions, in mm, you want the sheet to measure after cutting (straight line cuts only) and how many you need of that size cut. You can specify as many sizes as will fit in one sheet.
For example: 1@1000x400mm, 2@450x300mm etc...
- Note: If you require different cuts for each sheet purchased, add the each sheet and it's cuts to the cart individually. Cuts described for each Panel on the order will apply to the entire quantity of sheets ordered on that line.
- Click the Add To Cart button
The “Technical” Bit Heating & Cooling Insulation
Convection is the movement of air circulation caused when warm air rises and cool denser air falls.
The convection process is reduced when a narrow airspace is put between the two air movements. The narrow airspace increases the drag between rising and falling air. The net result is that the air falling down the window is not cooled to the same extent, as it would be if it came in direct contact with the cold external glass.
Conduction is the process by which heat is directly transmitted through a material when there is a difference of temperature. Glass is a very good conductor of heat and hence cold.
Warm air can ‘hold’ more moisture as water vapour than cold air can.
Dew point is the temperature, at which a given parcel of air must be cooled down (at constant barometric pressure) for water vapour to condense into water droplets. Often referred to as dew or condensation.
Convection & Conduction
What are U and R-values ?
They are values used to indicate the energy efficiency of materials with regards to heat loss. A U-value is the amount of heat transferred or conducted through a material and an R-value is the resistance of heat flow through a material. They are essentially two sides of the coin; one is the inverse of the other. R-values are used to rate walls and ceilings and are applied to individual materials such as insulation batts and gypsum board. R-values do not translate well to windows and other fenestration products. That is why windows are best measured in U-values because they can rate the energy efficiency of the combined materials in a building component or the entire assembly including the airspace.The lower the U-value, the better the insulating performance will be.
Single glazing typically has a U-value of approximately 5.8, double glazing starts at 3.14 and decreases. Ecoglaze has been calculated to have a U-Value of 2.7, lower than many types of double-glazing. This means Ecoglaze can achieve up to 54% less heat loss through your windows if applied to single glazing.
Ecoglaze works just as effectively in a cooling climate as it does in a heating climate. It can prevent the heat from coming in on a scorching hot summers day making your home more comfortable and reducing the air conditioning costs. Alternatively in winter it will still let as much of the sun’s energy through the windows but trap and stop the warm air from escaping on the cold evenings. Depending on the climate zone and surrounding geographical environment in which you live, energy savings achieved by Ecoglaze Secondary Glazing will vary. So not only will Ecoglaze reduce the energy bills within your home, but another important factor to consider here is the extra comfort and wellbeing secondary glazing will bring to your living environment.
As mentioned earlier, warm air holds more moisture than cold air. As the falling warm air in a room cools a dew point can be reached.
Ecoglazel Secondary Glazing greatly reduces the volume of condensation occurring and that’s got to be better than mopping it up every morning!
Looking after your Ecoglaze panels